Product Form
| Material: | Ductile Cast Iron GGG500-7 OR GGG450-12, ASTM A536 |
| Standard: | ISO2531, BS EN545, EN598,EN12842, AWWA C110&C153 |
| Pressure: | PN10, PN16, PN25,ANSI 125 |
| Specification: | DN50 to DN2000, K12/14 |
| Joints type: | Flange, Typon joint(push on joint); Bolted Gland K type Joint |
| Application: | Water supply project, drainage, sewerage, Irrigation ,water pipeline |
| Surface Inside: | Portland Cement mortar lining, bitumen paint, epoxy paint, powder |
| Surface Outside: | Epoxy paint, bitumen paint, epoxy powder coating |
| Accessories: | Gaskets, bolts and nuts available upon request |
| Inspection: | BV, or other third party inspection |
| Sample: | Sample for free, but buyer meed pay for the freight charge |
| Payment: | 30% TT upon placing order and 70% TT when see copy of B/L |
| Packing methods: | Wooden case/pallet with plastic layer, or as per customer's requirements |
Product Detail
The all flanged tee is a pipe connection device consists three flanges and two pipes. It is commonly used in branch pipes to allow two branch pipes to be connected side by side to a main pipe. The flanges and pipes of the all flanged tee are connected by flanges of unified specifications, so installation and maintenance are very convenient.
To connect three pipelines, all flanged tees can also be used to branch off a main pipeline into two smaller pipelines. This is useful when there is a need to divert the flow of a fluid to another part of the system, or when additional pipes need to be added to the system.
Application
All flanged tees are a versatile and reliable pipeline fitting that is widely used in many industries to connect, divert, and control the flow of various fluids through pipeline systems.
It is simple in structure, easy to use, and high in reliability, and is widely used in industrial pipeline systems such as petroleum, chemical industry, metallurgy, and medicine.
