Product Form
|
Material: |
Ductile Cast Iron GGG500-7 OR GGG450-12, ASTM A536 |
|
Standard: |
ISO2531, BS EN545, EN598,EN12842, AWWA C110&C153 |
|
Pressure: |
PN10, PN16, PN25,ANSI 125 |
|
Specification: |
DN50 to DN2000, K12/14 |
|
Joints type: |
Flange, Typon joint(push on joint); Bolted Gland K type Joint |
|
Application: |
Water supply project, drainage, sewerage, Irrigation ,water pipeline |
|
Surface Inside: |
Portland Cement mortar lining, bitumen paint, epoxy paint, powder |
|
Surface Outside: |
Epoxy paint, bitumen paint, epoxy powder coating |
|
Accessories: |
Gaskets, bolts and nuts available upon request |
|
Inspection: |
BV, or other third party inspection |
|
Sample: |
Sample for free, but buyer meed pay for the freight charge |
|
Payment: |
30% TT upon placing order and 70% TT when see copy of B/L |
|
Packing methods: |
Wooden case/pallet with plastic layer, or as per customer's requirements |
Product Description
An All Flanged Tee (AFT) is a fitting used in piping systems to connect three pipes. AFTs have a tee-shaped design with flanges on all three ends, making them easy to bolt onto other flanged components in the pipeline. They are typically made of materials such as carbon steel, stainless steel, or plastic. AFTs allow for the branching of a pipeline into two different directions at a 90-degree angle, while still maintaining a continuous flow of fluid. They are commonly used in industries such as oil and gas, water treatment plants, and chemical processing facilities.Some common types of AFTs include reducing flanged tees, which have different sized openings on each end, and spectacle blinds, which can be used to temporarily block off one branch of the pipeline. AFTs also come in various ratings and sizes, allowing them to accommodate a wide range of pipeline systems.
Advantages
1.Durability: Cast iron is known for its strength and durability, making it an excellent material for piping systems that require long service life under heavy loads and high pressures.
2.Resistance to corrosion and abrasion: Cast iron is highly resistant to corrosion and abrasion, making it ideal for use in harsh environments.
3.Easy to install: Cast iron pipes and fittings are relatively easy to install, which can reduce installation time and costs.
4.High flow capacity: Cast iron has a smooth interior surface that provides a high flow capacity and reduces pressure loss.
5.Low noise level: Cast iron provides excellent acoustical insulation, which helps to reduce noise in piping systems.
6. Cost-effective: Cast iron All Flanged Tee is cost-effective when compared to other materials like PVC, copper, or stainless steel.Overall, cast iron All Flanged Tee is an excellent choice for piping systems that require durability, resistance to corrosion and abrasion, and high flow capacity.
